English

Izixhobo zeFormwork Zibophe ngentonga kwaye zibophe iiNkotshi

Formwork Accessories Bopha intonga kunye qhina Nuts Umfanekiso Featured
  • Izixhobo zeFormwork Zibophe ngentonga kwaye zibophe iiNkotshi
  • Izixhobo zeFormwork Zibophe ngentonga kwaye zibophe iiNkotshi
  • Izixhobo zeFormwork Zibophe ngentonga kwaye zibophe iiNkotshi
  • Izixhobo zeFormwork Zibophe ngentonga kwaye zibophe iiNkotshi
  • Izixhobo zeFormwork Zibophe ngentonga kwaye zibophe iiNkotshi
  • Izixhobo zeFormwork Zibophe ngentonga kwaye zibophe iiNkotshi

Inkcazelo emfutshane:

Izixhobo zeFormwork ziquka iimveliso ezininzi, intonga yokubopha kunye namandongomane kubaluleke kakhulu ukulungisa iifom kunye nodonga kunye ngokuqinileyo. Ngokuqhelekileyo, sisebenzisa intonga yokubopha yi-D15 / 17mm, ubukhulu be-D20 / 22mm, ubude bunokunika isiseko esahlukileyo kwiimfuno zabathengi. I-nut ineentlobo ezininzi ezahlukeneyo, i-nut engqukuva, i-wing nut, i-swivel nut enepleyiti engqukuva, i-hex nut, isivalo samanzi kunye newasha njl njl.


  • Izincedisi:Bopha intonga kunye namantongomane
  • Iimpahla ezingekasilwa:Q235 / # 45 intsimbi / QT450
  • Unyango olungaphezulu:mnyama / Galv.

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Intshayelelo yeNkampani

    I-Tianjin Huayou Scaffolding Co., Ltd ikwisiXeko saseTianjin, esinokusinika inkxaso eyongezelelekileyo yokukhetha izixhobo zentsimbi ekrwada ezahlukeneyo kwaye inokulawula umgangatho.
    Kwinkqubo yeFormwork, intonga yokubopha kunye ne-nut zizinto ezibaluleke kakhulu ukudibanisa inkqubo epheleleyo yokwakha ikhonkrithi. Okwangoku, intonga ye-Tie ineepateni ezimbini ezahlukeneyo, iBritane kunye ne-metric measurement. Steel grade babe Q235 kunye # 45 steel. Kodwa kwi-nut, ibakala lentsimbi liyafana, i-QT450, ukujonga nje kunye nobubanzi obahlukileyo. Ubungakanani obuqhelekileyo yi-D90,D100,D110,D120 njl
    Okwangoku, iimveliso zethu zithunyelwa kumazwe amaninzi asuka kwingingqi yaseMzantsi Mpuma yeAsia, kwiMarike yoMbindi Mpuma naseYurophu, eMelika, njl.
    Umgaqo wethu: "Umgangatho wokuqala, uMthengi oPhambili kunye neNkonzo ePhezulu." Siyazinikezela ukuhlangabezana nawe
    iimfuno kunye nokukhuthaza intsebenziswano yethu ezuzisa ngokufanayo.

    Iinkcukacha eziBonisiweyo

    Ngokunyaniseka, zonke iimarike ezahlukeneyo zineemfuno ezahlukeneyo kwaye umgangatho awulingani. kwaye, uninzi lwabathengi okanye umsebenzisi wokugqibela akanalo mbono kumgangatho, ukhathalelo kuphela kwaye uthelekise ixabiso.

    Ngokwenyani, ngokweemfuno ezahlukeneyo, sivelisa umgangatho ohlukeneyo wokukhetha.

    Kubathengi abakumgangatho ophezulu, sibacebisa #45 izixhobo zentsimbi ekrwada kunye neshushu-rolling enye, D17MM,

    amandla okuqina anokufikelela kwi-185-190kn.

    I-D20, amandla okuqina anokufikelela kwi-20kn.

    Ukunciphisa okufunekayo, sicebisa ukuba i-Q235 imathiriyeli ekrwada kunye nomzobo obandayo, amandla okuqina ayi-130-140kn kuphela.

    Igama Ubungakanani Inkqubo yobuchule Unyango loMphezulu Iimpahla ezingekasilwa
    Iqhina intonga D15/17mm I-Hot-rolling Mnyama/Hot Dip Galv/Electro-Galv. Q235 / # 45 intsimbi
    Iqhina intonga D15/17mm Umzobo obandayo Mnyama/Hot Dip Galv/Electro-Galv. Q235 / # 45 intsimbi
    Iqhina intonga D20/22mm I-Hot-rolling Mnyama/Hot Dip Galv/Electro-Galv. Q235 / # 45 intsimbi

    Ingxelo yoVavanyo

    Inkampani yethu inenkqubo yemveliso engqongqo kakhulu, ukusuka kwizinto ezikrwada ukuya kwisingxobo sokulayisha, i-QC yethu iya kuba nenkqubo epheleleyo yokuqinisekisa zonke iimpahla Ex-warehouse enemeko kakuhle.

    Ngenxa yomgangatho kunye neendleko, siya kuphakamisa ukhetho oluhlukeneyo kubathengi abahlukeneyo.

    Kwintonga ye-Tie kunye ne-nut, i-Standard Standards yi-GB/T28900 kunye ne-GB/T 228.

    Izincedisi zeFormwork

    Igama Pic. Ubungakanani mm Ubunzima beyunithi kg Unyango loMphezulu
    Iqhina intonga   15/17mm 1.5kg/m Mnyama/Galv.
    I-Wing nut   15/17mm 0.3kg Mnyama/Electro-Galv.
    I-Wing nut 20/22mm 0.6kg Mnyama/Electro-Galv.
    Round nut ngamaphiko ama-3 20/22mm, D110 0.92kg Mnyama/Electro-Galv.
    Round nut ngamaphiko ama-3   15/17mm, D100 0.53 kg / 0.65kg Mnyama/Electro-Galv.
    Round nut ngamaphiko ama-2   D16 0.5kg Mnyama/Electro-Galv.
    Hex nut   15/17mm 0.19kg Mnyama/Electro-Galv.
    Iqhina le nut- Swivel Combination Plate nut   15/17mm 1kg Mnyama/Electro-Galv.
    Iwasha   100x100mm   Mnyama/Electro-Galv.
    Indawo yokudibanisa iqhosha 2.45kg Electro-Galv.
    Isibambiso seFormwork clamp-Wedge Lock     2.8kg Electro-Galv.
    Isibambiso seFormwork-Lock Lock Clamp   120mm 4.3 Electro-Galv.
    Ikhowuni yentsimbi DW15mm 75mm 0.32kg Mnyama/Electro-Galv.
    Formwork Spring clamp   105x69mm 0.31 Electro-Galv./Painted
    Iqhina eliMcaba   18.5mmx150L   Ukuzigqibezela
    Iqhina eliMcaba   18.5mmx200L   Ukuzigqibezela
    Iqhina eliMcaba   18.5mmx300L   Ukuzigqibezela
    Iqhina eliMcaba   18.5mmx600L   Ukuzigqibezela
    Wedge Pin   79mm 0.28 Mnyama
    Hook encinci / enkulu       Isilivere epeyintiweyo
  • Ngaphambili:
  • Okulandelayo:

    • Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala