Sandar ɗaure don aikin tsari da zane
Kamfanin Tianjin Huayou Scaffolding Co., Ltd yana cikin Tianjin. Ta hanyar amfani da yanayin ƙasa, yana iya zaɓar nau'ikan kayan ƙarfe daban-daban cikin sauƙi da kuma sarrafa ingancin samfura yadda ya kamata.
A cikin tsarin ƙarfafa samfuri, sandunan matsin lamba (Tee Rods) da goro sune manyan abubuwan haɗin haɗin tsarin gabaɗaya. A halin yanzu, sandunan matsin lamba an raba su zuwa ma'auni biyu: imperial da metric. Matakan ƙarfe da ake da su sune ƙarfe Q235 ko #45. Kayan goro iri ɗaya ne QT450. Babban bambance-bambancen yana cikin kamanni da diamita. Bayanan gama gari sun haɗa da D90, D100, D110, D120, da sauransu.
Ana sayar da kayayyakinmu ga ƙasashe da yankuna da dama kamar Kudu maso Gabashin Asiya, Gabas ta Tsakiya, Turai da Amurka. Kamfanin yana bin ƙa'idodin "inganci da farko, abokin ciniki da farko, sabis mafi girma", kuma yana da niyyar biyan buƙatunku da haɓaka alaƙar haɗin gwiwa mai amfani da cin nasara.
Ana Nuna Cikakkun Bayanai
Gaskiya ne, buƙatu sun bambanta a kasuwanni daban-daban, kuma matakan inganci ba su da daidaito. Bugu da ƙari, yawancin abokan ciniki ko masu amfani da ƙarshen ba su fahimci inganci ba—suna mai da hankali ne kawai kan kwatanta farashi.
Duk da haka, muna bayar da maki daban-daban na inganci bisa ga takamaiman buƙatu.
Ga abokan ciniki waɗanda ke buƙatar inganci mai kyau, muna ba da shawarar kayan ƙarfe #45 tare da tsarin birgima mai zafi. Ga D17mm, ƙarfin birgima zai iya kaiwa 185–190kN. Ga D20mm, ƙarfin birgima ya kai 200kN.
Ga ayyukan da ke da ƙarancin buƙatu, muna ba da shawarar kayan aiki na Q235 tare da tsarin zane-zanen sanyi, inda ƙarfin juriya shine 130-140kN kawai.
| Suna | Girman | Tsarin Fasaha | Maganin Fuskar | Kayan danye |
| Sandar Tie | D15/17mm | Zafi-birgima | Baƙi/Mai Zafi Galv/Electro-Galv. | ƙarfe Q235/#45 |
| Sandar Tie | D15/17mm | Zane-zanen sanyi | Baƙi/Mai Zafi Galv/Electro-Galv. | ƙarfe Q235/#45 |
| Sandar Tie | D20/22mm | Zafi-birgima | Baƙi/Mai Zafi Galv/Electro-Galv. | ƙarfe Q235/#45 |
Rahoton Gwaji
Kamfaninmu yana da tsari mai tsauri na samarwa, tun daga kayan ƙasa zuwa kwantena na kaya, QC ɗinmu zai sami cikakken tsari don tabbatar da duk kayayyaki a cikin shagonmu na Ex-store tare da kyakkyawan yanayi.
Saboda inganci da farashi, za mu ba da shawarar zaɓuɓɓuka daban-daban ga abokan ciniki daban-daban.
Ga sandar ɗaure da goro, Ma'aunin Gwaji shine GB/T28900 da GB/T 228.
Kayan Haɗi na Formwork
| Suna | Hoton. | Girman mm | Nauyin naúrar kg | Maganin Fuskar |
| Sandar Tie |  | 15/17mm | 1.5kg/m | Baƙi/Galva. |
| Gyadar fikafikai |  | 15/17mm | 0.3kg | Baƙi/Galv na lantarki. |
| Gyadar fikafikai |  | 20/22mm | 0.6kg | Baƙi/Galv na lantarki. |
| Gyada mai zagaye mai fikafikai 3 |  | 20/22mm, D110 | 0.92kg | Baƙi/Galv na lantarki. |
| Gyada mai zagaye mai fikafikai 3 |  | 15/17mm, D100 | 0.53 kg / 0.65 kg | Baƙi/Galv na lantarki. |
| Gyada mai zagaye da fikafikai biyu |  | D16 | 0.5kg | Baƙi/Galv na lantarki. |
| Gyada mai siffar hex |  | 15/17mm | 0.19kg | Baƙi/Galv na lantarki. |
| Ƙwallon da aka haɗa da goro mai kama da goro |  | 15/17mm | 1kg | Baƙi/Galv na lantarki. |
| Injin wanki |  | 100x100mm | Baƙi/Galv na lantarki. | |
| Maƙallin kulle panel |  | 2.45kg | Electro-Galv. | |
| Maƙallin Makullin Maƙalli na Formwork |  | 2.8kg | Electro-Galv. | |
| Maƙallin Tsarin Aiki-Maƙallin Kulle na Duniya |  | 120mm | 4.3 | Electro-Galv. |
| Mazugi na ƙarfe |  | DW15mm 75mm | 0.32kg | Baƙi/Galv na lantarki. |
| Formwork Spring manne |  | 105x69mm | 0.31 | An yi fenti da Electro-Galv./An yi fenti |
| Layi Mai Faɗi |  | 18.5mmx150L | Kammalawa da kanka | |
| Layi Mai Faɗi | | 18.5mmx200L | Kammalawa da kanka | |
| Layi Mai Faɗi | | 18.5mmx300L | Kammalawa da kanka | |
| Layi Mai Faɗi | | 18.5mmx600L | Kammalawa da kanka | |
| Pin ɗin maƙalli |  | 79mm | 0.28 | Baƙi |
| Ƙarami/Babba Ƙoƙi |  | Azurfa mai fenti |
