Thenga iiRinglock Rosette ezilungileyo kunye neeLedgers ezithe tyaba

Thenga iRinglock Rosette eBalaseleyo kunye neeLedger ezithe tyaba Umfanekiso obonisiweyo

Inkcazo emfutshane:

Njengenxalenye ebalulekileyo yenkqubo ye-ringlock scaffolding, i-ledger idlala indima ebalulekileyo ekudibaniseni imigangatho ngokuthe tye. Iqulathe iintloko ezimbini ze-ledger ezidityaniswe kuzo zombini iziphelo zombhobho wentsimbi (ngesiqhelo i-OD48mm okanye i-OD42mm), ziqiniswe ngephini ye-wedge evalela kwi-rosette yomgangatho. Ubude obuqhelekileyo bulinganiswa ukusuka embindini wemigangatho emibini, kunye neendlela eziqhelekileyo eziquka i-0.39m, 0.73m, 1.09m, 1.4m, 1.57m, 2.07m, 2.57m, kunye ne-3.07m. Ubude obulungiselelwe ngokwezifiso buyafumaneka xa buceliwe. Nangona ingeyiyo inxalenye ephambili ethwala umthwalo, i-ledger ibalulekile kwisimo senkqubo. Iintloko ze-ledger zinokwenziwa ngokwezifiso kwaye zenziwe kusetyenziswa i-wax mold okanye iteknoloji ye-sand mold casting.

Iimpahla ezingekasilwa:S235/Q235/Q355

I-OD:42mm/48.3mm

Ubude:eyenziwe ngokwezifiso

Iphakheji:ipalethi yentsimbi/intsimbi ehluthwe

I-MOQ:100PCS

Ixesha lokuzisa:Iintsuku ezingama-20

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

I-Ringlock Ledger isebenza njengecandelo elithe tye elidibanisa imigangatho emibini ethe nkqo kwinkqubo ye-scaffolding. Ubude bayo bumiselwa ngumgama ophakathi ukuya embindini phakathi kwemigangatho emibini edibanisa kuyo. I-ledger nganye inetyhubhu yentsimbi ye-Ø48.3mm enentloko ye-cast ledger edityanisiweyo kwicala ngalinye. Ezi ntloko zibotshelelwe kwiirosettes kwimigangatho kusetyenziswa iiphini zokutshixa ezidibeneyo. Nangona i-ledger ingeyona nto iphambili ethwala umthwalo, idlala indima ebalulekileyo ekugqibezeleni isakhelo solwakhiwo. Enyanisweni, ngaphandle kwe-ledger, akunakwenzeka ukuhlanganisa inkqubo ye-Ringlock esebenza ngokupheleleyo—imigangatho inika inkxaso ethe nkqo, ngelixa ii-ledgers (ezidla ngokubizwa ngokuba "zii-horizontals") zibonelela ngonxibelelwano olufunekayo oluthe tye. Iintloko ze-ledger ziyafumaneka kwiindlela ezahlukeneyo zoyilo, kubandakanya i-wax-mould kunye neenguqulelo ze-sand-mould cast, ezinobunzima obuqala kwi-0.34kg ukuya kwi-0.5kg. Zombini iintlobo zeentloko kunye nobude be-ledger zinokwenziwa ngokwezifiso ngokweenkcazo zeprojekthi okanye imizobo yabathengi.

Ubungakanani obulandelayo

Into	OD (mm)	Ubude (m)	THK (mm)	Iimpahla ezingekasilwa	Yenzelwe wena
I-Ringlock Single Ledger O	42mm/48.3mm	0.3m/0.6m/0.9m/1.2m/1.5m/1.8m/2.4m	1.8mm/2.0mm/2.5mm/2.75mm/3.0mm/3.25mm/3.5mm/4.0mm	STK400/S235/Q235/Q355/STK500	EWE
	42mm/48.3mm	0.65m/0.914m/1.219m/1.524m/1.829m/2.44m	2.5mm/2.75mm/3.0mm/3.25mm	STK400/S235/Q235/Q355/STK500	EWE
	48.3mm	0.39m/0.73m/1.09m/1.4m/1.57m/2.07m/2.57m/3.07m/4.14m	2.5mm/3.0mm/3.25mm/3.5mm/4.0mm	STK400/S235/Q235/Q355/STK500	EWE
Ubungakanani bunokukhawulelwa

Iingenelo ze-ringlock scaffolding

1. Ukuguquguquka kwezicelo ezahlukeneyo
Yenzelwe ukuziqhelanisa nayo nayiphi na imeko yokwakha, inkqubo yeRinglock inesithuba esilinganayo se-rosette (500mm okanye 600mm) kunye neseti epheleleyo yezinto ezifanayo eziquka imigangatho, iiledger, ii-diagonal braces, kunye neebrackets ezinxantathu. Olu hlobo lwemodyuli luvumela ukuba lulungiselelwe uluhlu olubanzi lweeprojekthi, ukusuka kwiinkxaso zebhulorho kunye ne-facade scaffolding ukuya kwi-setups zesiteji, ii-lighting towers, ii-safety mounting towers, kunye nokwakhiwa kwee-pier.

2. Ukhuseleko oluPhezulu lweZakhiwo
Yenzelwe ukuzinza, le nkqubo isebenzisa indlela yephini ye-wedge eyazibophelela ngokwayo ekhusela izinto kwi-rosette ngomxhuzulane, iqinisekisa uqhagamshelo oluqinileyo noluthembekileyo. Ukuhlanganiswa kwee-ledgers ezithe tye kunye nee-straight diagonal braces ezithe nkqo kwenza isakhiwo esingunxantathu kwiyunithi nganye, simelana ngempumelelo namandla athe tye kunye nathe nkqo ngaphandle kokuguquka. Xa idibene nezixhobo ezihambelana nenkqubo ezifana neeplanga ezinee-hooks kunye nee-ladders, i-Ringlock scaffold iphucula kakhulu ukuqina kwenkqubo iyonke kunye nokhuseleko lwabasebenzi xa kuthelekiswa ne-scaffolding yendabuko.

3. Ukuqina Okuhlala Ixesha Elide
Yonke into ikhuselwe luhlobo olufanayo lwe-hot-dip galvanized. Olu nyango lubonelela ngokumelana nokugqwala okugqwesileyo, lususa isidingo sokupeyinta, kwaye luthintela ukugqwala, lunciphisa kakhulu iindleko zokugcinwa kwexesha elide. Olu nyango lomphezulu oluhlala ixesha elide lwandisa ubomi benkonzo yezixhobo zentsimbi ngeminyaka eli-15 ukuya kwengama-20, lubonelela ngembuyekezo engcono kutyalo-mali.

4. Ukusebenza kakuhle ngokweendleko
Inkqubo yeRinglock inesakhiwo esicocekileyo nesilula esinciphisa ukusetyenziswa kwentsimbi ngaphandle kokubeka emngciphekweni amandla, nto leyo enciphisa ngokuthe ngqo iindleko zezinto zokwakha kwiprojekthi yakho. Uyilo lwayo olusengqiqweni lwenza kube lula kwaye kukhawuleze ukuhlanganisa nokuqhaqha, okonga ixesha elixabisekileyo kunye nokunciphisa iindleko zomsebenzi kwindawo.

Ulwazi olusisiseko

1.Uphawu: Huayou

2. Izixhobo: Umbhobho we-Q355, umbhobho we-Q235, umbhobho we-S235

3. Unyango lomphezulu: i-galvanized eshushu efakwe kwi-galvanized (ubukhulu becala), i-electro-galvanized, i-powder coated, ipeyintiwe

4. Inkqubo yokuvelisa: izinto--- zinqunyulwe ngokobungakanani--- ukuwelda--- unyango lomphezulu

5. Iphakheji: ngephakheji ene-strip yentsimbi okanye nge-pallet

6.MOQ: 1Ton

7. Ixesha lokuhanjiswa: Iintsuku ezingama-20-30 zixhomekeke kubungakanani

Ingxelo yoVavanyo lomgangatho we-EN12810-EN12811

Inkcazo

I-Ringlock System yinkqubo ye-scaffolding esetyenziswa ngokweemodyuli. Iquka ikakhulu imigangatho, ii-ledgers, ii-diagonal braces, ii-base collars, ii-triangle brakets kunye nee-wedge pin.

I-Rinlgock Scaffolding yinkqubo ye-scaffold ekhuselekileyo nesebenzayo, isetyenziswa kakhulu ekwakhiweni kweebhulorho, iitonela, iinqaba zamanzi, indawo yokucocisa ioyile, kunye nobunjineli baselwandle.

Ngaphambili: I-Heavy Duty Formwork Clamp yeeNkqubo zoKwakha zeKhonkrithi

Okulandelayo: Umthengisi weHollow Jack Base oMgangatho oPhezulu weeJacks zeZimboni