Saitin Taye Mai Nauyi na Formwork da Matsawa

Satin Taye Mai Nauyi na Formwork da Manne Hoton da aka Fito

Takaitaccen Bayani:

Daga cikin kayan haɗin formwork daban-daban, Tie Rod For Formwork tare da goro masu dacewa suna taka muhimmiyar rawa wajen ɗaure formwork ɗin da kyau a bango. Diamita na sandar ɗaurewa na yau da kullun sun haɗa da D15/17mm da D20/22mm, yayin da tsayin an keɓance su bisa ga buƙatun aikin. Iyalin goro ya bambanta: goro mai zagaye, goro mai fikafikai, goro mai juyawa tare da faranti mai zagaye, goro mai hex, abin toshe ruwa, da wanki.

Kayan haɗi:Sandar ɗaure da goro

Kayan Aiki:Q235/#45 ƙarfe/QT450

Maganin Fuskar:baƙar fata/Galva.

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Daga cikin dukkan kayan haɗin formwork, Tie Rod For Formwork da goro masu dacewa suna taka muhimmiyar rawa wajen haɗa tsarin formwork ɗin da kyau don gina siminti. Sandunan ɗaure suna zuwa cikin ma'aunin aunawa guda biyu: na Burtaniya da na metric. Matakan ƙarfe da ake da su sune ƙarfe Q235 da #45, tare da diamita na gama gari na D15/17mm da D20/22mm. Tsawon ana iya daidaita shi gwargwadon buƙatun abokin ciniki. Ana yin goro da ƙarfe QT450 - iri ɗaya, ya bambanta kawai a siffar da girma. Shahararrun nau'ikan goro sun haɗa da zagaye, fikafikai, goro mai juyawa tare da farantin zagaye, hex, matse ruwa, da wanki. Diamita na goro na yau da kullun: D90, D100, D110, D120, da sauransu.

Kayan Haɗi na Formwork

Suna	Hoton.	Girman mm	Nauyin naúrar kg	Maganin Fuskar
Sandar Tie		15/17mm	1.5kg/m	Baƙi/Galva.
Gyadar fikafikai		15/17mm	0.3kg	Baƙi/Galv na lantarki.
Gyadar fikafikai		20/22mm	0.6kg	Baƙi/Galv na lantarki.
Gyada mai zagaye mai fikafikai 3		20/22mm, D110	0.92kg	Baƙi/Galv na lantarki.
Gyada mai zagaye mai fikafikai 3		15/17mm, D100	0.53 kg / 0.65 kg	Baƙi/Galv na lantarki.
Gyada mai zagaye da fikafikai biyu		D16	0.5kg	Baƙi/Galv na lantarki.
Gyada mai siffar hex		15/17mm	0.19kg	Baƙi/Galv na lantarki.
Ƙwallon da aka haɗa da goro mai kama da goro		15/17mm	1kg	Baƙi/Galv na lantarki.
Injin wanki		100x100mm		Baƙi/Galv na lantarki.
Maƙallin kulle panel			2.45kg	Electro-Galv.
Maƙallin Makullin Maƙalli na Formwork			2.8kg	Electro-Galv.
Maƙallin Tsarin Aiki-Maƙallin Kulle na Duniya		120mm	4.3	Electro-Galv.
Mazugi na ƙarfe		DW15mm 75mm	0.32kg	Baƙi/Galv na lantarki.
Formwork Spring manne		105x69mm	0.31	An yi fenti da Electro-Galv./An yi fenti
Layi Mai Faɗi		18.5mmx150L		Kammalawa da kanka
Layi Mai Faɗi		18.5mmx200L		Kammalawa da kanka
Layi Mai Faɗi		18.5mmx300L		Kammalawa da kanka
Layi Mai Faɗi		18.5mmx600L		Kammalawa da kanka
Pin ɗin maƙalli		79mm	0.28	Baƙi
Ƙarami/Babba Ƙoƙi				Azurfa mai fenti

Ana Nuna Cikakkun Bayanai

Suna	Girman	Tsarin Fasaha	Maganin Fuskar	Kayan danye
Sandar Tie	D15/17mm	Zafi-birgima	Baƙi/Mai Zafi Galv/Electro-Galv.	ƙarfe Q235/#45
Sandar Tie	D15/17mm	Zane-zanen sanyi	Baƙi/Mai Zafi Galv/Electro-Galv.	ƙarfe Q235/#45
Sandar Tie	D20/22mm	Zafi-birgima	Baƙi/Mai Zafi Galv/Electro-Galv.	ƙarfe Q235/#45

Rahoton Gwaji

Fa'idodi

Bukatun kasuwa sun bambanta, kuma masu amfani da yawa suna mai da hankali ne kawai kan farashi maimakon inganci na gaske. Don magance wannan, muna bayar da Tie Rod For Formwork a matakan inganci daban-daban don dacewa da buƙatun aiki daban-daban.

Don ayyukan da ake buƙata sosai: ƙarfe #45, mai birgima mai zafi, D17mm - ƙarfin tensile har zuwa 185–190kN; D20mm - ƙarfin tensile har zuwa 20kN.

Don ayyukan yau da kullun ko na kasafin kuɗi: ƙarfe Q235, mai ƙarfin juriya mai sanyi - kimanin 130–140kN.

Ana sarrafa tsarin samar da kayayyaki daga zaɓin kayan da aka ƙera zuwa loda kwantena. Ƙungiyar QC ɗinmu tana duba kowane tsari bayan an kammala tsari, don tabbatar da cewa duk kayayyaki sun bar rumbun ajiya cikin kyakkyawan yanayi.

Ma'aunin gwaji: GB/T28900 da GB/T 228.

Ba wai kawai muna sayar da kayayyaki ba ne - muna ba da shawarar ingancin da ya dace bisa ga ainihin buƙatunku, tare da daidaita aiki da farashi yadda ya kamata.