Boima ba Mosebetsi oa Formwork Tie Rod & Clamp Set
Har'a lisebelisoa tsohle tsa foromo, Tie Rod For Formwork le linate tse tšoanang li bapala karolo ea bohlokoa ho hokela sistimi ea foromo ka mokhoa o sireletsehileng bakeng sa kaho ea konkreite. Lithupa tsa thae li tla ka litekanyetso tse peli tsa tekanyo: Brithani le metric. Mekhahlelo ea tšepe e fumanehang ke tšepe ea Q235 le #45, e nang le bophara bo tloaelehileng ba D15/17mm le D20/22mm. Bolelele bo ka fetoloa ho latela litlhoko tsa bareki. Linate li entsoe ka tšepe ea QT450 - sehlopha se tšoanang, se fapana feela ka sebopeho le boholo. Mefuta e tsebahalang ea linate e kenyelletsa chitja, lepheo, nate e potolohang e nang le poleiti e chitja, hex, water stopper, le washer. Bophara ba linate tse tloaelehileng: D90, D100, D110, D120, jj.
Lisebelisoa tsa Foromo
| Lebitso | Setshwantsho. | Boholo mm | Boima ba yuniti kg | Phekolo ea Bokaholimo |
| Thae Rod |  | 15/17mm | 1.5kg/m | Ntšo/Galv. |
| Nate ea mapheo |  | 15/17mm | 0.3kg | Ntšo/Electro-Galv. |
| Nate ea mapheo |  | 20/22mm | 0.6kg | Ntšo/Electro-Galv. |
| Nate e chitja e nang le mapheo a 3 |  | 20/22mm, D110 | 0.92kg | Ntšo/Electro-Galv. |
| Nate e chitja e nang le mapheo a 3 |  | 15/17mm, D100 | 0.53 kg / 0.65 kg | Ntšo/Electro-Galv. |
| Nate e chitja e nang le mapheo a 2 |  | D16 | 0.5kg | Ntšo/Electro-Galv. |
| Nate ea hex |  | 15/17mm | 0.19kg | Ntšo/Electro-Galv. |
| Nate ea Tie- Motsoako o Potolohang oa Poleiti |  | 15/17mm | 1kg | Ntšo/Electro-Galv. |
| Mohlatsoi |  | 100x100mm | Ntšo/Electro-Galv. | |
| Sekoahelo sa senotlolo sa phanele |  | 2.45kg | Electro-Galv. | |
| Sehokelo sa ho Lokolla sa Formwork-Wedge Lock |  | 2.8kg | Electro-Galv. | |
| Sehokelo sa Foromo-Bokahohle ba Sehokelo sa Lock |  | 120mm | 4.3 | Electro-Galv. |
| Khoune ea tšepe |  | DW15mm 75mm | 0.32kg | Ntšo/Electro-Galv. |
| Sehokelo sa selemo sa foromo |  | 105x69mm | 0.31 | Electro-Galv./E pentiloeng |
| Thae e bataletseng |  | 18.5mmx150L | E ikentse | |
| Thae e bataletseng | | 18.5mmx200L | E ikentse | |
| Thae e bataletseng | | 18.5mmx300L | E ikentse | |
| Thae e bataletseng | | 18.5mmx600L | E ikentse | |
| Pin ea wedge |  | 79mm | 0.28 | Botsho |
| Sehokelo se Nyenyane/Se Seholo |  | Silevera e pentiloeng |
Lintlha tse Bonts'ang
| Lebitso | Boholo | Mokhoa oa Mokhoa | Phekolo ea Bokaholimo | Lisebelisoa tse so fetoloe |
| Thae Rod | D15/17mm | Ho tjhesa ho chesang | Galv e Ntšo/e Chesang ea Dip/Electro-Galv. | Tšepe ea Q235/#45 |
| Thae Rod | D15/17mm | Ho taka ka serame | Galv e Ntšo/e Chesang ea Dip/Electro-Galv. | Tšepe ea Q235/#45 |
| Thae Rod | D20/22mm | Ho tjhesa ho chesang | Galv e Ntšo/e Chesang ea Dip/Electro-Galv. | Tšepe ea Q235/#45 |
Tlaleho ea Teko
Melemo
Litlhoko tsa 'maraka lia fapana, 'me basebelisi ba bangata ba tsepamisa maikutlo thekong feela ho fapana le boleng ba 'nete. Ho rarolla sena, re fana ka Tie Rod For Formwork maemong a fapaneng a boleng ho lekana le litlhoko tse fapaneng tsa projeke.
Bakeng sa merero e batloang haholo: #45 tšepe, e phutholotsoeng ka ho chesa, D17mm – matla a ho thaepa ho fihlela ho 185–190kN; D20mm – matla a ho thaepa ho fihlela ho 20kN.
Bakeng sa merero e tloaelehileng kapa e theko e tlase: Tšepe ea Q235, e huloang ka serame - matla a ho thaepa a ka bang 130–140kN.
Ts'ebetso ea rona ea tlhahiso e laoloa ka thata ho tloha khethong ea thepa e tala ho isa ho tlatseng lijana. Sehlopha se seng le se seng se hlahlojoa ke sehlopha sa rona sa QC ho latela mekhoa e felletseng, ho netefatsa hore thepa eohle e tloha polokelong ea thepa e le boemong bo phethahetseng.
Litekanyetso tsa teko: GB/T28900 le GB/T 228.
Ha re rekise dihlahiswa feela – re kgothaletsa boleng bo nepahetseng ho latela ditlhoko tsa hao tsa nnete, ho leka-lekanya tshebetso le ditjeo ka tsela e atlehang.
