Scaffolding tubes are connected to industrial structural steel beams. The beams are often placed sloping, overhead or in remote places of a building where a normal right angle coupler cannot be easily used. A Scaffold Swivel Beam Coupler allows the scaffold tube to be connected to the steel beam at any angle.
This connection is totally different from normal tube-to-tube scaffold couplers and is ideal for temporary access, ie maintenance scaffolding, which is constructed around fixed steelwork, such as industrial buildings or bridges.
How Swivel Beam Couplers Connect Steel Structures
The main difference between a fixed beam clamp and a scaffold swivel girder coupler is the connection angle which can be adjusted on the swivel coupler.
The same part is available as a fixed fitting for right angle use. However the swivel version allows for a variety of angles to be used without having to form the tube up into a right angle.
◆ The beam clamp has a steel jaw that grips the beam flange and a swivel section that holds the scaffold tube. The connection is secured by a threaded bolt that is tightened up to ensure the connection is secure enough.
◆ On most scaffolding jobs the couplers are used in pairs and positioned on each side of the beam as part of the overall scaffold design.
By providing scaffolding beam couplers in a number of arrangements, it is possible to provide scaffold connectors for working around unusual and difficult inclines, overhead structures and irregular steel frames.
Where Swivel Girder Couplers Are Commonly Used
A scaffold forged coupler can be very useful in a number of different situations in construction and maintenance work for connecting beams with scaffold tubes.
Industrial maintenance
Temporary scaffolding connections to steel beams are required in unusual angles around factories, processing plants and equipment.
Overhead access
Swivel beam fittings can be used to connect scaffold tubes to underneath steel beams when accessing over head areas are restricted.
Inclined structures
Scaffold tubes positioned at an angle to each other by means of a swivel connection for complex geometric frames.
Outdoor construction
Hot-dip galvanized scaffold couplers for building scaffold in rainy place or humid place.
⚠ The connection and loads must be in accordance with the approved scaffold design for every application.
Huayou is a leading scaffolding and formwork manufacturer from China with over 5 years experience in developing and supplying Scaffold Fittings. Its sister company established in 2019 specializes in exporting high quality Forged and Pressed Scaffold Fittings to worldwide customers in nearly 50 countries.
Frequently Asked Questions
Q1: Can swivel beam couplers connect tubes at different angles?
Yes. The scaffold tube can be positioned at any angle relative to the steel beam.
Q2: What flange thickness can the forged model accommodate?
The standard drop-forged version of our couplers can be supplied to fit beam flange thicknesses up to 45mm.
Q3: Are galvanized swivel beam clamps suitable for use outdoors?
Yes, galvanized swivel beam clamps are suitable for use outdoors as they are corrosion resistant, however the choice of finish will depend upon the working environment.
Q4: What should buyers confirm before placing an order?
Scaffold tube diameter, flange of steel beam, applicable standards, type of fasteners, surface finish and performance documents etc.
Post time: Nov-18-2026